Classic Subway Wall Set 60 × 84

The look of subway tile without grout to seal or scrub. These solid-surface panels have a 3 × 6 in classic subway tile pattern molded in, and the color runs all the way through, so there is no surface coating to chip or crack. Made in the USA.

• Panel sizes: Back panel 62 in W × 84 in H; side panels 36 in D × 84 in H (pair); size tolerance ± 3/8 in. Panels can be trimmed on site to fit, so measure them before final framing.
• Pattern: Classic Subway, 3 × 6 in simulated tile.
• Colors: White
• Material: Compression-molded solid surface with glass reinforcement. It is non-porous, so it resists mold, mildew and stains, and it stands up to household cleaners and solvents.
• In the box: Complete Set: 1 back panel and 2 side panels. The back panel and the side-panel pair are also sold on their own.
• Installation: The panels bond to a sound, primed wall with 100% clear silicone (plan on 4 to 10 tubes) and are braced for 24 hours. No nails or screws go through the panels. Install over 1/2 in moisture-resistant drywall, cement board or plywood, or over ceramic tile that is still firmly bonded. Let the panels sit in the room for 6 hours first, and install at 65 °F or warmer.
• Grab bars and seats: Anchor them to blocking or a structural backer behind the panels, never to the panels alone.
• Care: Warm water, a soft cloth and everyday bathroom cleaners. Rinse cleaners off within five minutes, and check the caulk joints once a month.
• Other sizes and colors: Also made 72 or 96 in tall, 30 to 38 in deep, and with a 50 in back panel, in more colors. Call 480.636.1816 for a quote.
• Shipping: Ships on a pallet by LTL freight; liftgate delivery available. The complete set ships at about 247 lb.